INSTRUCTION MANUAL
Wireless Gateway/Hub E7

 

You will need Nous Smart Home App. Scan the QR code or download it from direct link

PRECAUTIONS

  • Read this manual carefully.
  • Use the product within the temperature and humidity limits specified in the technical data sheet.
  • Do not install the product near heat sources, such as radiators, etc.
  • Do not allow the device to fall and be subject to mechanical loads.
  • Do not use chemically active and abrasive detergents to clean the product. Use a damp flannel cloth for this.
  • Do not disassemble the product yourself - diagnostics and repair of the device must be carried out only in a certified service center.

Know about the Smart Gateway

This smart gateway, adopting super low power consumption Zigbee technology, can work with kinds of smart sensors and smart home appliances to build a smart home system and the gateway works as the central controller.

 

System LED
Red:  Power on and it is not connected with router
Blue: Power on and it is connected with router
Blink (red/blue): Power on and it is transmitting data with router

Pairing LED
OFF: The gateway hasn't been paired with router 
ON:  The gateway has been paired with router 
Blink: The gateway is in pairing mode with its sub-device

Power supply
USB 5V(Type-C)

Ethernet port
Connect to router with LAN cable

Button
Long press: Press and hold the button for 5 seconds the
gateway enters pairing mode with router
Short press: The gateway enters adding sub-device mode

 

Quick Installation Guide

 

  • (If you have installed the NOUS Smart Home on your mobile phone,please go to step 3) Scan QR code or search NOUS Smart Home in APP Store or Google Play to install APP(new user must register account first)
  • Connect mobile phone to your 2.4GHz Wi-Fi router (with internet).
  • Connect it to the Router or Switch (which is in same network as your phone) through LAN cable. 

  • Run NOUS Smart Home APP, Click"+" at the top right corner (select Gateway and Others-> Wireless Gateway(zigbee)

  • Pressing the button for 5 seconds until the red LED blinks, then follow the in-app instructions to connect the smart gateway to your network.

  • Waiting for a few seconds ,you can see the gateway is shown and you may rename it

  • Press Done to finish the installation of gateway