INSTRUCTION MANUAL
Smart WiFi Socket A1

You will need Nous Smart Home App. Scan the QR code or download it from direct link

 

What's in the box

Home Control Outlet x 1
User Manual x 1

1. ON/OFF Button
2. Flame Resistant Material
3. Power Plug
4. Socket Panel

Note: ON/OFF button can be used as restore button, long press can change the flashing speed and will restore your smart socket to factory defaults. Only do this if you are sure you want to erase all your settings.

Connecting Your Socket with APP

Easy Mode (Recommended)

  • Please make sure the mini socket has connected with electricity at the beginning, then open the" NOUS Smart Home" APP, tap the" ADD DEVICES" or the"+"at the upper right corner of the page and select "WiFi Socket"
  • Long press on/off button of the device for 5 seconds until indicator light quickly flashed, the interface page already stepped into" Add Device" Page as the above;

  • Make sure the indicator light is flashing rapidly and confirm it in APP.
  • Choose you home Wi-Fi (make sure the Wi-Fi connection you choose is the same connection/Wi-Fi you used on your phone/device and it should be 2.4Ghz not 5Ghz). Enter the correct password and confirm.
    If Wi-Fi is 5Ghz or the password is in correct, it will lead to "conection failure".
  • Wait to successfully configure, then tap "Done"

AP Mode

  • Please change to "AP Mode" if connecting failed in "Easy Mode". The AP Mode is at the upper right corner of the "ADD DEVICE" page. 
  • Long press on/off button until the indicator light flashes slowly; 
  • Make sure the indicator light is flashing slowly and confirm it in App;
  • Choose the local WIFI and enter the correct password and confirm; 
  • Tap" Connect Now", choose WIFI hotspot named, then back to "NOUS Smart Home" application; 
  • Wait for configuring successfully, then tap "Done".

Note: if the connection fails in "AP Mode", please check if your router is dual-band Wi-Fi. If it is dual-band Wi-Fi, please enter the router management interface to split 2.4G and 5G Wi-Fi, and then connect 2.4G Wi-Fi

Safety information

The device is recommended for use indoors and in a dry location only, power outlet shall be used within it's published outlet rating on the instructions.
Please contact seller for replacement if there is any damage caused by transportation.
Please plug in the socket in proper condition and away from children.
Please plug in the socket fully while using for safety concern.
Please do not disassemble or install the socket, otherwise there may cause product damaged or security risks.

Using Amazon Echo Quick Guide

What You'll Need...
Amazon Alexa APP & Account
NOUS Smart Home APP & Account (Users need to register your own account, select region as “The United States”)
Echo, Echo Dot, Tap or other Amazon voice operated devices.

Tip: Rename the device after configuring successfully, The name of the device is recommended to use easy pronunciation of the English words.
(Amazon Echo only supports English temporarily)

Set Your Echo Speaker by Alexa APP

  • Sign in with Alexa account & password (If not registered,
    sign up first); After login, click the menu at the top left, then
    click "Settings", and choose "Set up a new device";
  • Choose a device (for example, Echo). When the right
    page appears, long press the small dot on your Echo
    device until the light turns to yellow.
    Then click "Continue" on App.
  • Choose users' WIFI and wait for a few minutes.
  • After an introduction video, click next step, it will turns to
    "Home" page automatically. Now the Echo is connected to
    Alexa APP through WiFi successfully.

Enable Our Skill in Alexa APP

  • Choose "Skills" in the options bar, and then search
    "NOUS Smart Home" in the search bar; Select "NOUS
    Smart Home" in the search results, and then click "Enable".
  • Input the user name and password that you had previously registered (Only support the account in the United States); When you see the right page, it means the Alexa account is linked with NOUS Smart Home account.

Control device by Voice

After the previous operation, you can control the device via Echo.

  • Discovering devices: Firstly, users need to say to Echo: "Echo(or Alexa), Discover my devices."
    Echo will start to finding the devices which is added in NOUS Smart Home APP, it will take about 20 seconds to show the result. Or you may click "Discover devices" in Alexa APP, it will show the devices that found successfully.
    Note: "Echo" is one of the wake-up name, which can be
    any of these three names (Settings): Alexa/Echo/Amazon.
  • Support Skill List
    User can control devices by instructions like below:
    Alexa, turn on [device]
    Alexa, turn off [device]

Attention: The name of the device must be consistent with the addition of NOUS Smart Home APP.

 

* This translation may be inaccurate because it was made with google translate service