Smart WiFi Tasmota switch module 1/2 channel L13T
| Main settings | |
|---|---|
| Brand | NOUS |
| Certificate | CE, RoHS |
| Special features | 1/2 gang |
| Specifications | |
| Body material | ABS V |
| Device dimensions | 40*40*20mm |
| Maximum load | 2200W |
| Operating voltage range | 90-250V |
| Operating temperature | -20°C ~ 50°C |
| Rated Current | 16A |
| Network | |
| Communication standard | WiFi 2.4 GHz |
| Protocol | IEEE802.11 b/g/n |
| Frequency range: | 2.412 - 2.484 GHz |
| Max.Transmit Power | 20 dBm |
User Guide
- Power on
- ON/OFF operating principle: The connected appliances work/stop throught live wire power on/off.
How to connect:
- Plug in the device
- Find open wifi hotspot with Tasmota word in name
- Connect to it and go to 192.168.4.1 address in browser
- Enter your wifi network name and password
- After confirming network data, power strip will show you IP address that it will be available from, copy it, just in case.
- It will automatically redirect you to this address after you network data is filled and saved.
- Power strip is ready to use. Template and rules already activated, but in case you will need it later - you can find it below
Template Parameters:
{"NAME":"NOUS Smart WiFi Switch Module L13T","GPIO":[1,161,1,160,225,224,1,1,544,1,32,1,1,1],"FLAG":0,"BASE":18}
if there is power button:
Hold the power button 40+ seconds, untill light blinks and device restarts
if there is no power button:
Plug the device in and out 6 times and leave plugged in on the 7th - LED should start to blink, that means socket is ready to be connected again
if have access to the web interface:
type reset 1 in console and press enter
Smart Home Intergations
Tasmota is Incredibly expandable and flexible and can be integrated with:
Alexa, AWS IoT, Domoticz, Home Assistant, Homebridge, HomeSeer, IP Symcon, KNX, NodeRed, nymea, OctoPrint, openHAB, Otto, IOBroker, Mozilla WebThings Adapter, SmartThings, Tasmohab, Homematic ip, etc
Uživatelská příručka
- Zapnutí
- Princip činnosti ON/OFF: Připojené spotřebiče fungují/zastavují se zapnutím/vypnutím napájení pod proudem.
Jak se připojit:
- Zapojte zařízení
- Najděte otevřený wifi hotspot se slovem Tasmota v názvu
- Připojte se k němu a přejděte v prohlížeči na adresu 192.168.4.1
- Zadejte název a heslo své wifi sítě
- After confirming network data, power strip will show you IP address that it will be available from, copy it, just in case.
- It will automatically redirect you to this address after you network data is filled and saved.
- Power strip is ready to use. Template and rules already activated, but in case you will need it later - you can find it below
Template Parameters:
{"NAME":"NOUS Smart WiFi Switch Module L13T","GPIO":[1,161,1,160,225,224,1,1,544,1,32,1,1,1],"FLAG":0,"BASE":18}
if there is power button:
Hold the power button 40+ seconds, untill light blinks and device restarts
if there is no power button:
Plug the device in and out 6 times and leave plugged in on the 7th - LED should start to blink, that means socket is ready to be connected again
if have access to the web interface:
zadejte do konzoly reset 1 a stiskněte enter
Inteligentní domácí intergace
Tasmota je neuvěřitelně rozšiřitelná a flexibilní a lze ji integrovat s:
Alexa, AWS IoT, Domoticz, Home Assistant, Homebridge, HomeSeer, IP Symcon, KNX, NodeRed, nymea, OctoPrint, openHAB, Otto, IOBroker, Mozilla WebThings Adapter, SmartThings, Tasmohab, Homematic ip atd.
Керівництво користувача
- Увімкніть живлення
- Принцип роботи ON/OFF: підключені прилади працюють/зупиняються через увімкнення/вимкнення живлення проводу під напругою.
Як підключити:
- Підключіть пристрій до мережі
- Знайдіть відкриту точку доступу Wi-Fi зі словом Tasmota в назві
- Підключіться до нього та перейдіть за адресою 192.168.4.1 у браузері
- Введіть назву та пароль своєї мережі Wi-Fi
- After confirming network data, power strip will show you IP address that it will be available from, copy it, just in case.
- It will automatically redirect you to this address after you network data is filled and saved.
- Power strip is ready to use. Template and rules already activated, but in case you will need it later - you can find it below
Template Parameters:
{"NAME":"NOUS Smart WiFi Switch Module L13T","GPIO":[1,161,1,160,225,224,1,1,544,1,32,1,1,1],"FLAG":0,"BASE":18}
if there is power button:
Hold the power button 40+ seconds, untill light blinks and device restarts
if there is no power button:
Plug the device in and out 6 times and leave plugged in on the 7th - LED should start to blink, that means socket is ready to be connected again
if have access to the web interface:
введіть reset 1 у консолі та натисніть enter
Розумний дім
Tasmota неймовірно розширювана та гнучка і може бути інтегрована з:
Alexa, AWS IoT, Domoticz, Home Assistant, Homebridge, HomeSeer, IP Symcon, KNX, NodeRed, nymea, OctoPrint, openHAB, Otto, IOBroker, Mozilla WebThings Adapter, SmartThings, Tasmohab, Homematic ip тощо