NOUS L6T Smart Tasmota Switch

INSTRUCTION MANUAL
Smart WiFi Switch L6T

• Power on
• ON/OFF operating principle: The connected appliances work/stop throught live wire power on/off.

Appliance wiring instruction

Celling lamp wiring instruction

One wire wiring instruction

Note: The WiFi Switch must be powered up by N and L wires

How to connect:

1. 1. Plug in the device
   2. Find open wifi hotspot with Tasmota word in name
   3. Connect to it and go to 192.168.4.1 address in browser
   4. Enter your wifi network name and password
   5. After confirming network data, power strip will show you IP address that it will be available from, copy it, just in case.
   6. It will automatically redirect you to this address after you network data is filled and saved.
   7. Power strip is ready to use. Template and rules already activated, but in case you will need it later - you can find it below

Template Parameters:

{"NAME":"NOUS L6T Smart Awitch","GPIO":[1,161,1,160,225,224,1,1,544,1,32,1,1,1],"FLAG":0,"BASE":18}

if there is power button:

Hold the power button 40+ seconds, untill light blinks and device restarts

if there is no power button:

Plug the device in and out 6 times and leave plugged in on the 7th - LED should start to blink, that means socket is ready to be connected again

if have access to the web interface:

type reset 1 in console and press enter

Smart Home Intergations

Tasmota is Incredibly expandable and flexible and can be integrated with: 

Alexa, AWS IoT, Domoticz, Home Assistant, Homebridge, HomeSeer, IP Symcon, KNX, NodeRed, nymea, OctoPrint, openHAB, Otto, IOBroker, Mozilla WebThings Adapter, SmartThings, Tasmohab, Homematic ip, etc

for more info look here:
https://tasmota.github.io/docs/Integrations/

* This translation may be inaccurate because it was made with google translate service